DeVilbiss FAC125 Guide de dépannage télécharger pdf (Page 4)

4 - ENG

HAZARD

RISK OF

ELECTRICAL SHOCK

RISK FROM

FLYING OBJECTS

RISK TO BREATHING

RISK FROM

MOVING PARTS

RISK OF BURNS

WHAT CAN HAPPEN

YOUR AIR COMPRESSOR IS POWERED BY

ELECTRICITY. LIKE ANY OTHER ELECTRI-

CALLY POWERED DEVICE,

IF IT IS NOT USED

PROPERLY IT MAY CAUSE ELECTRIC

SHOCK.

REPAIRS ATTEMPTED BY UNQUALIFIED

PERSONNEL CAN RESULT IN SERIOUS

INJURY OR DEATH BY ELECTROCUTION.

\ELECTRICAL GROUNDING:

FAILURE TO

PROVIDE ADEQUATE GROUNDING TO THIS

PRODUCT COULD RESULT IN SERIOUS

INJURY OR DEATH FROM ELECTROCU-

TION. SEE GROUNDING INSTRUCTIONS.

THE

COMPRESSED AIR STREAM CAN

CAUSE SOFT TISSUE DAMAGE TO EX-

POSED SKIN

AND CAN PROPEL DIRT,

CHIPS,

LOOSE PARTICLES AND SMALL

OBJECTS AT

HIGH SPEED, RESULTING IN

PROPERTY DAMAGE OR PERSONAL INJURY.

THE

COMPRESSED AIR FROM YOUR

COMPRESSOR

IS NOT SAFE FOR BREATH-

ING! THE AIR STREAM MAY CONTAIN

CARBON MONOXIDE, TOXIC VAPORS OR

SOLID PARTICLES.

SPRAYED MATERIALS SUCH AS PAINT,

PAINT SOLVENTS, PAINT REMOVER,

INSECTICIDES, WEED KILLERS, ETC..

CONTAIN HARMFUL VAPORS AND POI-

SONS.

MOVING PARTS CAN CAUSE SERIOUS

INJURY OR DAMAGE IF THEY COME INTO

CONTACT WITH YOU OR YOUR CLOTHING.

ATTEMPTING TO OPERATE OR REPAIR

COMPRESSOR WITH PROTECTIVE

SHROUDS REMOVED CAN EXPOSE YOU

TO MOVING PARTS AND ELECTRICAL

SHOCK.

A PORTABLE

COMPRESSOR CAN FALL

FROM A TABLE, WORKBENCH OR ROOF

CAUSING DAMAGE TO THE COMPRESSOR

WHICH COULD EXPOSE YOU TO HAZARD-

OUS MOVING OR ELECTRICAL PARTS.

THE

COMPRESSOR CYCLES AUTOMATI-

CALLY WHEN THE PRESSURE SWITCH IS

IN THE ON/AUTO POSITION.

TOUCHING EXPOSED METAL SUCH AS THE

COMPRESSOR HEAD OR OUTLET TUBE

CAN RESULT IN SERIOUS BURNS.

HOW TO PREVENT IT

NEVER OPERATE THE COMPRESSOR OUT-

DOORS WHEN IT IS RAINING OR IN WET

CONDITIONS.

NEVER OPERATE COMPRESSOR WITH

COVER COMPONENTS REMOVED OR DAM-

AGED.

ANY

ELECTRICAL WIRING OR REPAIRS

REQUIRE ON THIS PRODUCT

SHOULD BE

PERFORMED BY AUTHORIZED SERVICE

CENTER PERSONNEL IN ACCORDANCE

WITH NATIONAL AND LOCAL ELECTRICAL

CODES.

MAKE CERTAIN THAT THE ELECTRICAL

CIRCUIT TO WHICH THE COMPRESSOR IS

CONNECTED

PROVIDES PROPER ELEC-

TRICAL GROUNDING, CORRECT VOLTAGE

AND ADEQUATE FUSE PROTECTION.

ALWAYS WEAR ANSI Z87.1 APPROVED

SAFETY GLASSES WITH SIDE SHIELDS

WHEN USING THE COMPRESSOR.

NEVER POINT ANY NOZZLE OR SPRAYER

TOWARD ANY PART OF THE BODY OR AT

OTHER PEOPLE OR ANIMALS.

NEVER INHALE AIR FROM THE COMPRES-

SOR EITHER DIRECTLY OR FROM A

BREATHING DEVICE CONNECTED TO THE

COMPRESSOR.

WORK IN AN AREA WITH GOOD CROSS-

VENTILATION. READ AND FOLLOW THE

SAFETY INSTRUCTIONS PROVIDED ON THE

LABEL OR SAFETY DATA SHEETS

FOR THE

MATERIAL YOU ARE SPRAYING. USE A

NIOSH/MSHA APPROVED RESPIRATOR

DESIGNED FOR USE WITH YOUR SPECIFIC

APPLICATION.

DO NOT REMOVE THE PROTECTIVE

COVERS FROM THIS PRODUCT. NEVER

OPERATE THE COMPRESSOR WITH

GUARDS OR COVERS WHICH ARE DAM-

AGED OR

REMOVED.

ANY

REPAIRS REQUIRED ON THIS PROD-

UCT SHOULD BE PERFORMED BY AUTHO-

RIZED SERVICE CENTER PERSONNEL.

ALWAYS

OPERATE COMPRESSOR IN A

STABLE SECURE POSITION TO PREVENT

ACCIDENTAL MOVEMENT OF THE UNIT.

NEVER OPERATE COMPRESSOR ON A

ROOF OR OTHER ELEVATED POSITION.

USE ADDITIONAL AIR HOSE TO REACH

HIGH LOCATIONS.

ALWAYS

TURN OFF THE COMPRESSOR,

BLEED PRESSURE FROM THE AIR HOSE

AND TANK UNPLUG FROM ELECTRICAL

OUTLET BEFORE PERFORMING MAINTE-

NANCE OR ATTACHING TOOLS AND AC-

CESSORIES.

NEVER TOUCH ANY EXPOSED METAL

PARTS ON COMPRESSOR DURING OR

IMMEDIATELY AFTER OPERATION.

COM-

PRESSOR WILL REMAIN HOT FOR SEV-

ERAL MINUTES AFTER OPERATION.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire