DeVilbiss HVLP Gravity Feed Spraygun Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pulvérisateur de peinture DeVilbiss HVLP Gravity Feed Spraygun. BINKS SV100 HVLP GRAVITY FEED SPRAY GUN Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 8
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
EN
77-2875-R7.1 (8/2014) 1 / 8
SERVICE MANUAL
BINKS SV100 HVLP
GRAVITY FEED SPRAY GUN
7042-6931-4
The following instructions provide the necessary information
for the proper maintenance of the Binks SV100 gravity
feed spray gun. Please read and understand all the
information in this document in order to get the maximum
performance from your new SV100 gravity spray gun.
The SV100 spray gun is the result of quality engineering
and development activity. The result is an ergonomic
product with reduced triggering effort and fine atomization.
The HVLP air cap has been specifically designed to
comply with local regulatory air quality restrictions.
The specification table details the operating parameters
of the gun to achieve those compliant conditions.
In addition, the relatively low air flow rate of the SV100
spray gun will help in containing overspray.
The SV100 spray gun should be operated under the safety
directions outlined in this literature. Your safety and the
safety of others depend on your thorough understanding
of the material contained on the Part Sheet.
If you have any questions or do not understand the
content in this literature, call your nearest service
representative.
SPECIFICATIONS
Max. Air Pressure: 175psi/12bar
For HVLP Compliance: 26 psi inlet pressure delivers
(with SV100-693K cap) 10 psi air cap pressures at
12 cfm air volume
Gun Body: Cast Aluminum
Fluid Path: Aluminum
Fluid Nozzle: Stainless Steel
Fluid Needle: Stainless Steel
Fluid Inlet Size: 3/8"-19 BSP(F)
Air Inlet Size; 1/4" NPS(M)
Gun Weight: 1.02 lbs. (461 g)
Vue de la page 0
1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - GRAVITY FEED SPRAY GUN

EN77-2875-R7.1 (8/2014) 1 / 8SERVICE MANUALBINKS SV100 HVLPGRAVITY FEED SPRAY GUN7042-6931-4The following instructions provide the necessary informat

Page 2 - WARNING

EN77-2875-R7.1 (8/2014)2 / 8Binks reserves the right to modify equipment specification without prior notice.LOCK OUT / TAG-OUTFailure to de-energize,

Page 3

EN77-2875-R7.1 (8/2014) 3 / 8OPERATION AND MAINTENANCE INSTRUCTIONSYour new SV100 Gravity Feed Spray Gun is exceptionally rugged in construction and

Page 4 - RIGHT WRONG

EN77-2875-R7.1 (8/2014)4 / 8To reduce overspray and obtain maximum efficiency, always spray with the lowest possible fluid/air pressure that produces

Page 5 - PARTS LIST

EN77-2875-R7.1 (8/2014) 5 / 8BINKS SV100 HVLP GRAVITY FEED SPRAY GUN ITEM PART NO. NO. DESCRIPTION QTY. 1 SV100-693K AIR CAP ...

Page 6 - CAUTION

EN77-2875-R7.1 (8/2014)6 / 8NOTETo reduce overspray and obtain maximum efficiency always spray with the lowest possible atomizing air pressure. C

Page 7 - ACCESSORIES

EN77-2875-R7.1 (8/2014) 7 / 8ACCESSORIESConsists of : 1 - Piercing Tool 48 - Disposable Liners 48 - Drain BushingsOMX-70-K48 Paint Cup Liner Kit

Page 8 - WARRANTY POLICY

EN77-2875-R7.1 (8/2014)8 / 8Finishing Brands reserves the right to modify equipment specications without prior notice. DeVilbiss, Ransburg, BGK, an

Commentaires sur ces manuels

Pas de commentaire